USB Power Delivery Controller
EJ898A is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
EJ898A supports USB PD Alternate mode, especially Display Port application which is compliant with VESA DisplayPort Alt Mode for USB Type-C Standard V1.0 specification. EJ898A can streamline the implementation of DisplayPort solution with embedded HPD mechanism and support different pin assignments via GPIO pins.
EJ898A can be configured by serial EEPROM or system controller to select different modes. They are Provider, Consumer, Provider/Consumer and Consumer/Provider swap mode.
EJ898A integrates 3.3V to 1.8V LDO to reduce component cost and take advantage of limited PCB space.
- USB Power Delivery Specification
- Support PD provider mode
- Support all PD profile 0~5
- Support baseband BMC coding for USB Type-C specification
- Support connection detection on Configuration Channel
- Support Vconn power switch control
- Support maximum current detection for device mode
- Pull-up/Pull-down resistor (Rp/Rd) integrated
- VCONN power switch integrated
- VESA DisplayPort Alt Mode on USB Type-C Standard V1.0 Specification
- Support HPD mechanism
- Support different pin assignments A/B/C/D via GPIO pins
- Power Saving Capability
- EJ898A can enter suspend mode to synchronize with system power state.
- EJ898A can keep charging plug-in device while system is in suspend mode
EJ898A is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
EJ898A supports USB PD Alternate mode, especially Display Port application which is compliant with VESA DisplayPort Alt Mode for USB Type-C Standard V1.0 specification. EJ898A can streamline the implementation of DisplayPort solution with embedded HPD mechanism and support different pin assignments via GPIO pins.
EJ898A can be configured by serial EEPROM or system controller to select different modes. They are Provider, Consumer, Provider/Consumer and Consumer/Provider swap mode.
EJ898A integrates 3.3V to 1.8V LDO to reduce component cost and take advantage of limited PCB space.
- USB Power Delivery Specification
- Support PD provider mode
- Support all PD profile 0~5
- Support baseband BMC coding for USB Type-C specification
- Support connection detection on Configuration Channel
- Support Vconn power switch control
- Support maximum current detection for device mode
- Pull-up/Pull-down resistor (Rp/Rd) integrated
- VCONN power switch integrated
- VESA DisplayPort Alt Mode on USB Type-C Standard V1.0 Specification
- Support HPD mechanism
- Support different pin assignments A/B/C/D via GPIO pins
- Power Saving Capability
- EJ898A can enter suspend mode to synchronize with system power state.
- EJ898A can keep charging plug-in device while system is in suspend mode