USB Power Delivery Controller
EJ898P is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
EJ898P can be configured by serial EEPROM or embedded OTP.
EJ898P integrates 3.3V to 1.8V LDO to reduce component cost and take advantage of limited PCB space.
- USB Power Delivery Specification
- Support PD provider mode
- Support all PD profile 0~5
- Support baseband BMC coding for USB Type-C specification
- Support detection of connection on Configuration Channel
- Support Vconn power switch control
- Pull-up/Pull-down resistor (Rp/Rd) integrated
- Vconn power switch integrated
- Power Saving Capability
- EJ898P can enter suspend mode to synchronize with system power state.
- EJ898P can keep charging plug-in device while system is in suspend mode.
EJ898P is a USB Power Delivery (PD) controller which is compliant with USB Power Delivery Specification Revision 2.0. The PD controller can negotiate voltage, current and direction with PD link partner to transfer up to 100W of power over Type-C connector and cable.
EJ898P can be configured by serial EEPROM or embedded OTP.
EJ898P integrates 3.3V to 1.8V LDO to reduce component cost and take advantage of limited PCB space.
- USB Power Delivery Specification
- Support PD provider mode
- Support all PD profile 0~5
- Support baseband BMC coding for USB Type-C specification
- Support detection of connection on Configuration Channel
- Support Vconn power switch control
- Pull-up/Pull-down resistor (Rp/Rd) integrated
- Vconn power switch integrated
- Power Saving Capability
- EJ898P can enter suspend mode to synchronize with system power state.
- EJ898P can keep charging plug-in device while system is in suspend mode.